Efficient Switch Lubrication Technology
Our synthetic grease (Red Capsule #1003) is composed of synthetic oils, organic thickener, corrosion inhibitors, and solid lubricants and contains no solvents. It is classified as a CARB (California Air Resources Board) friendly product. It is designed to protect components from the environment and offers very good water washout protection.
A study conducted by Entergy demonstrated that our system reduces the pull force needed to open MOAB (Manually Operated Air Brake Switches) systems resulting in a 22% reduction in force required to open and a 37% reduction in force required to close the switches helping to avoid work-related injuries.
This material will not become gummy, sticky, dry out, separate, or bleed oil over time. Its synthetic formulation is active from -80 to 400 deg. F. This product yields over 210 hours in ASTM B-117 (Salt Fog Humidity Chamber) testing.
The capsules that contain Results Lubricating’s grease are biodegradable and will dissolve in 4-6 weeks if left outside. This assumes normal precipitation and sun exposure.
Do not allow the capsule to be stored in a humid environment or be exposed to temperatures over 110 deg F for extended periods of time, as degradation of the capsules will occur. Store the capsules in a cool, dry environment.
For Use on:
- Switches
- Contacts
- Stationary Components
Technical Data Information
| Operating Range, Min °F, Max °F | -80 °F to 400 °F | |
| Evaporation 22 Hrs @ 210 °F | ASTM D-2595 | 0.50% |
| Evaporation 22 Hrs @ 350 °F | ASTM D-2595 | 7.98% |
| Load Wear Index @77 °F | ASTM D-2596 | 54.65 |
| Weld Point – Load | ASTM D-2596 | 200 kg |
| High Temperature Performance 350 °F, 10,000 RPM, 5 lb | ASTM D-3336 | 1,000 Plus |
| Low Temperature Torque @ -65 °F, Starting | ASTM D-1478 | 3,040 g-cm |
| Low Temperature Torque @ -65 °F, Starting | ASTM D-1478 | 410 g-cm |
Our Penetrant Formula (Yellow Capsule #1004) comprises synthetic oil, organic thickeners, wetting agents, extreme pressure additives, and corrosion inhibitors. It is designed to migrate between mating metal parts and loosen friction points. This assures penetration into moving mechanisms to ensure excellent performance of these mechanisms. This penetrating property allows dried-out, corroded surfaces to function like new ones after our penetrant has been applied. The penetration of this material into the mechanisms will begin immediately upon application. For better results, allow the penetrant to work into the mechanism for 2-5 minutes before operating it.
A study conducted by Entergy demonstrated that our system reduces the pull force needed to open MOAB (Manually Operated Air Brake Switches) systems resulting in a 22% reduction in force required to open and 37% reduction in force required to close the switches helping to avoid work-related injuries.
This product yields excellent corrosion protection. Per the chart below, our synthetic penetrant provides 840 hours of rust protection in ASTM B-117 (Salt Fog Humidity Chamber). In Coastal areas that are under constant attack from salt and most often extreme sun, this material loosens frozen mechanisms and restores the operability of the corroded mechanism. It has a functional temperature range from -65 deg. F to 300 degrees F. It will not become gummy, tacky, or dry out over time. Regular application assures that mechanisms operate effectively throughout their designed lifetime.
The capsules that contain Results Lubricating’s penetrant are biodegradable and will dissolve in 4-5 weeks if left outside. This assumes normal precipitation and sun exposure.
Do not allow the capsule to be stored in a humid environment or be exposed to temperatures over 110 deg. F for extended periods of time as degradation of the capsules will occur. Store the capsules in a cool, dry environment.
For Use on:
- Hinges
- Pivots-Points
- Fasteners
- Universal Joints
- Gang Operated Switch Junctions
- Frozen Switches
Technical Data Information
| Operating Range, Min °F, Max °F | -65 °F to 300 °F | |
| Salt Fog Chamber Test | ASTM B-117 | +840 Hrs |
| Specific Gravity | ASTM D-1298 | .80% |
| Flash Point | ASTM D-92 | >200°F |
| Solubility in Water | Negligible | |
| Reactivity in Water | Negligible | |
| Vapor Pressure | 1 mm @ 20°C |
Corrosion Test Information
In the following chart, 11 competitive products were chosen for testing against Results Lubricating Penetrant, testing was conducted by an independent laboratory. The testing methodology was ASTM B-117 salt fog corrosion. Three carbon steel panels of each candidate were sandblasted, coated with the candidate’s product, exposed to synthetic seawater salt fog, 100% humidity, and monitored for rust formation. Upon detection of corrosion, the test was ended for that candidate, and the total exposure time was logged. Certifications of testing results are available upon the customer’s written request.
| A | 110 | B’Laster Corrosion Stop Water-Resistant Spray Grease |
| B | 216 | Results Lubricating Grease formula (Red Capsule) |
| C | 120 | WD-40 |
| D | 120 | Service Spring Multi-Purpose |
| E | 24 | National Heavy Duty Garage Door/Operator Lubricant |
| F | 24 | Garage Door Lubricant GDL-100 |
| G | 120 | Liquid Wrench Lubricating Oil |
| H | 24 | Door1 Garage Door Super Lube |
| I | 24 | Denco Foamy Garage Door & Operator Super Lube |
| J | 24 | Denco Garage Door Lubricant Ultra Gel |
| K | 24 | Famous B’Laster – The Dry Lube |
| L | 24 | PrimeFlo Silicone Lubricant |
| M | 840 | Results Lubricating Penetrant Formula (Yellow Capsule) |
Our Pest Control (Green Capsule #1005) is an environmentally safe, all-natural formula patented by Sniff ‘n’ Stop, Inc. Utilizing time-released, encapsulated essential oils, the Sniff ‘n’ Stop product has proven to be a safe and effective means to deter animals, including squirrels, raccoons, birds, etc., from making a new home in undesirable locations. Learn more about how this revolutionary product works on Sniff ‘n’ Stop’s website.